The RUTX14 Industrial Cellular Router is a powerful industrial mobile router with an integrated CAT12 LTE modem featuring 5x Ether ports, WiFi and extensive RutOS functionality for reaching exceptional speeds of up to 600 Mbps, thus making it the fastest router in the Tektonika Networks products among 4G devices.
RUTX14 Industrial Cellular Router 4G LTE CAT12
As the router supports dual SIM cards and dual-band wifi for failover/auto-switch purposes, it provides remarkable networking strength with safe and continuous transmission of data.
Moreover, as Auto-APN configuration is enabled by default, the router is extremely safe to use, minimizing the technological barrier for the people lacking experience in it. A real-time signal strength indicator is also included to assist with external antenna positioning with USB services.
What makes it stand out is that it can be remotely located from any regular power sockets as it can operate on passive PoE (9-30v) through its LAN1 port making this device an optimal choice for primary or backup connectivity purposes.
Key Features of RUTX14 Industrial Cellular Router
- User-friendly web interface to easily configure the router.
- Download up to 600 Mbps. Upload up to 150 Mbps.
- 5x gigabit Ethernet ports with up to 128 port/tag-based VLANs supported.
- Inputs/Outputs: 1x digital input, 1x digital open collector output.
- CPU: Qualcomm, 4x ARM Cortex A7, 717 MHz
- Memory of 256 MB Flash, 256 MB RAM.
- Bluetooth LE: 4.0.
MOBILE
-
SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
-
Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, Carrier aggregation
-
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
-
USSD: Supports sending and reading Unstructured Supplementary Service Data messages
-
Black/White list: Operator black/white list
-
Multiple PDN: Possibility to use different PDNs for multiple network access and services
-
Band management: Band lock, Used band status display
-
APN: Auto APN
-
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
-
Passthrough: Router assigns its mobile WAN IP address to another device on LAN
-
Wireless mode: 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
-
WiFi security: WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
-
SSID/ESSID: ESSID stealth mode
-
WiFi users: up to 150 simultaneous connections
-
Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
-
Bluetooth 4.0: Bluetooth low energy (LE) for short range communication
-
WAN: 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
-
LAN: 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
-
Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
-
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
-
VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
-
Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
-
Firewall: Port forward, traffic rules, custom rules
-
DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd
-
QoS / Smart Queue Management (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
-
DDNS: Supported >25 service providers, others can be configured manually
-
Network backup: WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
-
Load balancing: Balance Internet traffic over multiple WAN connections
-
Hotspot: Internal/external Radius server, captive portal, built in customizable landing page
-
SSHFS: Possibility to mount remote file system via SSH protocol
-
Authentication: Pre-shared key, digital certificates, X.509 certificates
-
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
-
Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
-
VLAN: Port and tag based VLAN separation
-
Mobile quota control: Custom data limits for both SIM cards
-
WEB filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
-
Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
-
OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
-
OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
-
IPsec: IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
-
GRE: GRE tunnel
-
PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3 support
-
Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
-
DMVPN: Method of building scalable IPsec VPNs
-
SSTP: SSTP client instance support
-
ZeroTier: ZeroTier VPN client support
-
WireGuard: WireGuard VPN client and server support
TCP SLAVE
-
ID range: Respond to one ID in range [1;255] or any
-
Allow Remote Access: Allow access through WAN
-
Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
-
Supported functions
01, 02, 03, 04, 05, 06, 15, 16
-
Supported data formats
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
-
Protocol: HTTP(S), MQTT, Azure MQTT
-
MQTT Gateway: Allows sending commands and receiving data from MODBUS Master through MQTT broker
-
Supported modes: TCP Master, DNP3 Outstation
MONITORING & MANAGEMENT
-
WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
-
FOTA: Firmware update from server, automatic notification
-
SSH: SSH (v1, v2)
-
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
-
Call: Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off
-
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
-
MQTT: MQTT Broker, MQTT publisher
-
SNMP: SNMP (v1, v2, v3), SNMP Trap
-
JSON-RPC: Management API over HTTP/HTTPS
-
MODBUS: MODBUS TCP status/control
-
RMS: Teltonika Remote Management System (RMS)
IOT PLATFORMS
-
Cloud of Things: Allows monitoring of: Device data, Mobile data, Network info, Availability
-
ThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
-
Cumulocity: Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
-
Azure IoT Hub: Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
-
CPU: Quad-core ARM Cortex A7, 717 MHz
-
RAM: 256 MB, DDR3
-
FLASH storage: 256 MB, SPI Flash
-
WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
-
FOTA: Update FW
-
RMS: Update FW/configuration for multiple devices at once
-
Keep settings: Update FW without losing current configuration
-
Operating system: RutOS (OpenWrt based Linux OS)
-
Supported languages: Busybox shell, Lua, C, C++
-
Development tools: SDK package with build environment provided
LOCATION TRACKING
-
GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
-
Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
-
NMEA: NMEA 0183
-
NTRIP: NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
-
Server software: Supported server software TAVL, RMS
-
Geofencing: Configurable multiple geofence zones
-
Data rate: USB 2.0
-
Applications: Samba share, USB-to-serial
-
External devices: Possibility to connect external HDD, flash drive, additional modem, printer
-
Storage formats: FAT, FAT32, NTFS
-
Input: 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high
-
Output: 1 x Digital Output, Open collector output, max output 30 V, 300 mA
-
Events: Email, RMS, SMS
-
I/O juggler: Allows to set certain I/O conditions to initiate event
-
Connector: 4-pin industrial DC power socket
-
Input voltage range:9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
-
PoE (passive)
Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 50 VDC
-
Power consumption: Idle: < 4 W, Max: < 22 W
PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS, SIM)
-
Ethernet: 5 x RJ45 ports, 10/100/1000 Mbps
-
I/O’s: 1 x Digital Input, 1 x Digital Output on 4-pin power connector
-
Status LEDs: 2 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs
-
SIM: 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders
-
Power: 1 x 4-pin power connector
-
Antennas: 4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS
-
USB: 1 x USB A port for external devices
-
Reset: Reboot/User default reset/Factory reset button
-
Other: 1 x Grounding screw
-
Casing material: Full aluminum housing
-
Dimensions (W x H x D): 132 x 44 x 95 mm
-
Weight: 515 g
-
Mounting options: DIN rail (can be mounted on two sides), flat surface placement
OPERATING ENVIRONMENT
-
Operating temperature: -40 °C to 75 °C
-
Operating humidity: 10% to 90% non-condensing
-
Ingress Protection Rating: IP30