The Teltonika TCR100 is a 4G CATS LTE router capable of achieving speed up to 300 mbps. In addition to two ethernet ports, it can also support dual band wifi as it is equipped with internal wireless antennas for easy network access and steady connection.
TCR100 4G WIFI ROUTER FOR HOME USE
As it features WPA3 encryption, it provides the highest possible security level. It is equipped with a pair of indoor mobile antennas that are detachable and replaceable with outdoor antennas providing more efficient performance.
This compact robust router comes with a sound physical display of LEDs showing the status of internet connection, signal strength and mobile signal etc making it easy to use. Once you enter the sim card, the router is switched on and any other configurations can be done through this user-friendly interface.
It can either work as a primary or backup connection depending on the needs. As it features RutOS it is also compatible with Teltonika’s RMS service. This industrial router provides our extensive industrial IoT experience at home providing safe and reliable transmission of data in offices and home settings.
Key Features of TCR100 4G WIFI ROUTER:
- LTE CAT6 4G router-provides cellular speeds up to 300Mbps
- Two RJ-45 Ethernet ports
- 2x SMA Antenna connector for LTE
- Dual-Band Wifi with 2.4 GHz,5.0 GHz frequencies
- Rugged housing for protection
- Compatible with on-demand VPN services
- Can be used as a primary or a backup connectivity source.
- Multiple devices can be connected easily as it is Dual-band and has two Ethernet ports.
MOBILE
-
Mobile module: 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
-
Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, Carrier aggregation
-
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
-
USSD: Supports sending and reading Unstructured Supplementary Service Data messages
-
Black/White list: Operator black/white list
-
Multiple PDN: Possibility to use different PDNs for multiple network access and services
-
Band management: Band lock, Used band status display
-
APN: Auto APN
-
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
-
Passthrough: Router assigns its mobile WAN IP address to another device on LAN
WIRELESS
-
Wireless mode: 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
-
WiFi security: WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
-
SSID/ESSID: ESSID stealth mode
-
Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET
-
WAN: 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
-
LAN: 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
NETWORK
-
Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
-
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
-
VoIP pass-through support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
-
Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
-
Firewall: Port forward, traffic rules, custom rules
-
DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd
-
QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
-
DDNS: Supported >25 service providers, others can be configured manually
-
Network backup: WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
-
Load balancing: Balance Internet traffic over multiple WAN connections
-
Hotspot: Internal/external Radius server, captive portal, built in customizable landing page
-
SSHFS: Possibility to mount remote file system via SSH protocol
SECURITY
-
Authentication: Pre-shared key, digital certificates, X.509 certificates
-
Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
-
Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
-
VLAN: Port and tag based VLAN separation
-
Mobile quota control: Custom data limits for SIM card
-
WEB filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
-
Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
-
OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
-
OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
-
IPsec: IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
-
GRE: GRE tunnel
-
PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3 support
-
Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
-
DMVPN: Method of building scalable IPsec VPNs
-
SSTP: SSTP client instance support
-
ZeroTier: ZeroTier VPN client support
-
WireGuard: WireGuard VPN client and server support
MODBUS TCP SLAVE
-
ID range: Respond to one ID in range [1;255] or any
-
Allow Remote Access: Allow access through WAN
-
Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
MODBUS TCP MASTER
-
Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
-
Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
-
Protocol: HTTP(S), MQTT, Azure MQTT
-
MQTT Gateway: Allows sending commands and receiving data from MODBUS Master through MQTT broker
-
Supported modes: TCP Master, DNP3 Outstation
MONITORING & MANAGEMENT
-
WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
-
FOTA: Firmware update from server, automatic notification
-
SSH: SSH (v1, v2)
-
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
-
Call: Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off
-
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
-
MQTT: MQTT Broker, MQTT publisher
-
SNMP: SNMP (v1, v2, v3), SNMP Trap
-
JSON-RPC: Management API over HTTP/HTTPS
-
MODBUS: MODBUS TCP status/control
-
RMS: Teltonika Remote Management System (RMS)
IOT PLATFORMS
-
Cloud of Things: Allows monitoring of: Device data, Mobile data, Network info, Availability
-
ThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
-
Cumulocity: Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
-
Azure IoT Hub: Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
SYSTEM CHARACTERISTICS
-
CPU: QCA9531, MIPS 24kc, 650 MHz
-
RAM: 128 MB, DDR2
-
FLASH storage: 16 MB, SPI Flash
FIRMWARE / CONFIGURATION
-
WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
-
FOTA: Update FW
-
RMS: Update FW/configuration for multiple devices at once
-
Keep settings: Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
-
Operating system: RutOS (OpenWrt based Linux OS)
-
Supported languages: Busybox shell, Lua, C, C++
-
Development tools: SDK package with build environment provided
POWER
-
Connector: 4-pin industrial DC power socket
-
Input voltage range: 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
-
Power consumption: 3.7 W average, 9.3 W max
PHYSICAL INTERFACES
-
Ethernet: 2 x RJ45 ports, 10/100 Mbps
-
Status LEDs: 1 x Internet, 1 x WiFi, 3 x Mobile connection strength, 2 x Ethernet status
-
SIM: 1 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder (Embedded SIM variant available)
-
Antennas: 2 x SMA for LTE, 2 x Internal for 2.4 GHz WiFi, 1 x Internal for 5 GHz WiFi
-
Power: 1 x 4-pin power connector
-
Reset: Reboot/User default reset/Factory reset button
-
WiFi On/Off: WiFi enable/disable button
-
WPS: WPS activation button
PHYSICAL SPECIFICATION
-
Casing material: Plastic housing with aluminum screws and heat sink
-
Dimensions (W x H x D): 150 x 37 x 105 mm
-
Weight: 376 g
-
Mounting options: Flat surface placement
OPERATING ENVIRONMENT
-
Operating temperature: -40 °C to 75 °C
-
Operating humidity: 10% to 90% non-condensing